How To Fix “Windows 10 Automatic Repair Couldn’t Repair Your PC”

Windows 10 comes with its own repair tool but sometimes Windows 10 Automatic Repair can’t fix your problems — this is that dreaded moment when the “Windows 10 Automatic Repair couldn’t repair your PC” message appears. This is a strange problem but fortunately for you, there’s a way to fix it.

How To Fix “Windows 10 Automatic Repair Couldn’t Repair Your PC”?

Fix – Windows 10 Automatic Repair couldn’t repair your PC

Solution 1 – Use Command Prompt from Windows 10 Boot Options menu

After your computer restarts several times, you should see Windows 10 Boot Options menu. When Boot Options menu appears, you need to do the following:

1. Choose Troubleshoot > Advanced Options.
2. Select Command Prompt from list of options.
3. When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:
   • bootrec.exe /rebuildbcd
   • bootrec.exe /fixmbr
   • bootrec.exe /fixboot
4. Some users are also suggesting that you need to run additional chkdskcommands as well. To perform these commands, you need to know drive letters for all your hard drive partitions. In Command Prompt you should enter the following (but remember to use the letters that match your hard drive partitions on your PC):
   • chkdsk /r c:
   • chkdsk /r d:
   This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.
5. Restart your computer and check if the issue is resolved.

For various PC problems, we recommend to use this tool.
This tool will repair most computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Quickly fix PC issues and prevent others from happening with this software:

1. Download ReimagePlus (100% safe download and endorsed by us).
2. Click “Start Scan” to find Windows issues that could be causing PC problems.
3. Click “Repair All” to fix all issues.

Solution 2 – Boot to Safe Mode and run Command Prompt
Users have reported that “Windows 10 Automatic Repair couldn’t repair your PC” message is sometimes caused by a bad driver, such as a MicrosoftWindows driver for a wireless Logitech mouse, for example. If you’re having this problem and you use similar hardware, try this solution:

1. After your computer restarts few times, you should boot to Boot Options menu. Choose Troubleshoot > Advanced options > Startup Settings.
2. Click the Restart button, and your computer should now restart and give you a list of options. Choose Enable Safe Mode with Networking.
3. When Safe Mode starts, you need to download updated version of the driver that’s giving you trouble. You can download the driver from manufacturer’s website, and you can save it to your USB flash drive.
4. Press Windows Key + X and choose Command Prompt (Admin) from the list.

5. When Command Prompt starts, enter the following and press Enter to run it:
   • DISM /Online /Cleanup-Image /RestoreHealth
     
   It might take about 15 or more minutes for this process to complete, so be patient. Do not interrupt it.
6. After the process is done, restart your computer.
7. When Windows 10 starts, install the driver that you’ve downloaded and the issue should be resolved.

This solution is a bit tricky because you need to know which driver is causing you this problem. Even if you don’t know, you can still try this solution and skip Step 3.

Fix – “Windows 10 Automatic Repair couldn’t repair your PC” loop

Solution 1 – Disable early launch anti-malware protection
Sometimes you might get stuck in a “Windows 10 Automatic Repair couldn’t repair your PC” loop and this could be due to Early launch anti-malware protection option. To disable this option, follow these steps:

1. After a few restarts, you should be able toaccess Boot Menu.
2. In the Boot Menu, choose Troubleshoot > Advanced Options >Startup Settings.
3. Your computer should now restart and give you a list of options.
4. Choose Disable early launch anti-malware protection (it should be option no. 8).
5. Restart your computer, and check if the issue has been resolved.

It has been reported that this problem can sometimes appear again. If this happens, repeat all the steps and uninstall your antivirus software. Users have reported some problems with Norton 360 antivirus software (although we assume the problem can be created by other antivirus software as well), so after you’ve deleted this application, everything should go back to normal.
Solution 2 – Delete the problematic file
You might get stuck in “Windows 10 Automatic Repair couldn’t repair your PC”loop due to certain files, with users having reported that sometimes VMWare files can cause this issue. To complete this process, you need to open the log file and check for which file is causing  this problem. To check the log file, you need to do the following:

1. Access the Boot Menu. You should see it after your computer restarts a few times.
2. Choose Troubleshoot > Advanced Options > Command Prompt.
3. When Command Prompt opens, enter the following:
   • C:
   • cd WindowsSystem32LogFilesSrt
   • SrtTrail.txt

After the file opens, you should see something like this: Boot critical file c:windowssystem32driversvsock.sys is corrupt. We have to mention that this is just an example as you will mostly likely get a different result. Now, you need to perform some research into what exactly this problematic file does. In our case, vsock.sys was a file related to a third party application called VMWare. Since this isn’t operating system file that is required by Windows 10, we can delete it.
To delete a file, you need to navigate to the specified location using the Command Prompt and enter del command. In our example, it would look like this:

• cd c:windowssystem32drivers
  
• del vsock.sys
  
  

Once again, this is just an example, and you might have to navigate to a different folder and delete a different file. Before deleting a file, make sure the file you want to delete isn’t a core Windows 10 file or else you can cause damage to your operating system. After you’ve removed the problematic file, restart your computer and uninstall the program that caused you this issue (in our case it was VMware, but it might be a different program for you).
Solution 3 – Disable Automatic Startup Repair
Sometimes you can get stuck in “Windows 10 Automatic Repair couldn’t repair your PC” loop and the simplest solution is just to disable Automatic Startup Repair. To do that, follow these steps:

1. When Boot Options start, choose Troubleshooting > Advanced Options > Command Prompt.
2. Now Command Prompt should start. Enter the following and press Enter to run it:
   • bcdedit /set {default} recoveryenabled No
     

After you’ve done this, the Startup Repair should be disabled, and you might be able to access Windows 10 again.
Solution 4 – Restore Windows registry
One of the possible causes for “Windows 10 Automatic Repair couldn’t repair your PC” loop is a corrupted registry, and the only solution for this  is to restore your registry from RegBack directory. To do that, follow these steps:

1. Wait for Boot Options to appear and start Command Prompt.
2. In Command Prompt, enter the following and press Enter to run it:
   • • copy c:windowssystem32configRegBack* c:windowssystem32config
       
       
3. If you get asked to overwrite files, type All and press Enter.
4. Now type exit and press Enter to exit Command Prompt.
5. Restart your computer and check if the issue has been resolved.

Solution 5 – Check device partition and osdevice partition
Sometimes it can happen that your device partition values aren’t correct, and this is the cause of “Windows 10 Automatic Repair couldn’t repair your PC”loop. To fix this issue, follow these steps:

1. From Boot Options start Command Prompt.
2. Enter the following and press Enter:
   • bcdedit
3. Find device partition and osdevice partition values and make sure that they are set to correct partition. On our device, the default and correct value is C:, but this can change for some reason to D: (or some other letter) and create problems.
   
   
4. If the value isn’t set to C:, enter the following commands and press Enter after each one:
   • bcdedit /set {default} device partition=c:
      
     
   • bcdedit /set {default} osdevice partition=c:
     
     
5. By default it should be C:, but if your Windows 10 is installed on a different partition, make sure that you use that partition’s letter instead of C.
6. Restart your computer and check if the issue has been resolved.

Solution 6 – Perform Refresh or Reset

We recommend this tool to update all your drivers automatically
Downloading drivers manually can be a long and tedious process. Outdated drivers can often cause crashes, file loss and even permanent damage to your computer. DriverAgent Plus quickly and automatically downloads all the drivers that you need:

1. Download DriverAgent Plus (100% safe download and endorsed by us).
2. Once the download is complete start the DriverAgent Plus.
3. Click the Start Scan button and let DriverAgent Plus download all the necessary drivers.

If the problem still persists, you might have to perform a Reset or Refresh. By doing this, your installed applications will be removed but your installed Universal apps and settings will be saved if you choose the Refresh option. On the other hand, the Reset option will delete all installed files, settings and apps. If you decide to take this step, it’s advised that you backup your important files.
To perform Refresh or Reset, you need to do the following:

1. When Boot Menu opens, choose Troubleshooting.
2. Choose between Refresh or Reset option.
    
   
3. Follow the instructions to complete the process.

We have to mention that you might need Windows 10 installation media to complete this process, so make sure that you have it.

Fix – Windows 10 Automatic Repair Loop without disc

Solution 1 – Check your boot priority in BIOS
If you want to fix Windows 10 Automatic Repair Loop without a disc, you need to check that boot priority is set properly in BIOS. If that’s the case, you might have to enter BIOS and change these settings. To do that, follow these steps:

1. While your computer boots, keep pressing one of the following buttons: F1, F2, F3, Del, Esc. Usually, there is a prompt to press a certain key to enter setup so keep an eye out for it, pressing it while your computer boots in order to enter BIOS.
2. Once you’ve entered BIOS, you need to locate the Boot section. The location of this section is different for each type of BIOS, so you’ll have to find it on your own.
3. After you’ve found Boot section, make sure that your hard drive is set as the first boot device. If you have multiple hard drives, make sure that the drive where you have Windows 10 installed is set as first boot device.
4.  Save changes and exit BIOS.

Users have reported that sometimes Windows Boot Manager might be set as the first boot device and that can cause a “Windows 10 Automatic Repair couldn’t repair your PC” loop on your computer. In order to fix that, make sure that your hard drive is set as the first boot device.
Solution 2 – Remove your laptop battery
Some users have reported that they have fixed Windows 10 Automatic Repair Loop without a disc on their laptop by simply removing the laptop battery. After you’ve removed the battery, put it back to your laptop, connect the power cable and check if the issue has been resolved.
Solution 3 – Reconnect your hard drive
In some cases “Windows 10 Automatic Repair couldn’t repair your PC” error can be caused by your hard drive, and the only solution is to reconnect it. Just turn off your PC, unplug it, open it, and disconnect your hard drive. Now you just need to reconnect your hard drive, connect the power cable, and start it again. Several users have already reported that reconnecting their hard drive has successfully fixed this problem for them, so you might want to try that. We have to mention that this step will break your warranty, so keep that in mind. If you have more than one hard drive, you’ll have to repeat this process each hard drive.
In addition, if you have more than one hard drive, you might want to disconnect only those hard drives on which you don’t have Windows 10 installed. Keep only one hard drive (the one that has Windows 10 on it) connected to your computer, and try to start Windows 10 again. If the issue is resolved, reconnect other hard drives.
Solution 4 – Remove your RAM
Few users have reported that they have managed to fix Windows 10 Automatic Repair Loop simply by removing their RAM memory. To do this, you need to turn off your computer, unplug it and remove all memory modules. Return memory modules to your computer and check if the issue has been resolved. If you have two or more RAM modules, try removing just one RAM module and starting your PC without it. You might have to repeat this step a few times, depending on how many modules you have.
Solution 5 – Remove additional USB drives
It has been reported that you can sometimes fix “Windows 10 Automatic Repair couldn’t repair your PC” problem by unplugging USB drives from your computer. If you have any additional USB drives attached, disconnect them, and check if the issue is resolved.
Solution 6 – Change your disk controller mode in BIOS
You can fix Windows 10 Automatic Repair Loop without a disc by entering BIOS and changing few settings. After you’ve entered BIOS, you need to find your disk controller mode and set it to Standard (IDE, SATA or Legacy) instead of RAID or AHCI. Save the changes and restart your computer. If the issue persists, try changing the mode again. If the issue still persists, return the disk controller mode to its original value.
Solution 7 – Enable NX, XD or XN in BIOS
To enable this option, enter BIOS and go to the Security tab. Find XD-bit (No-execute Memory Protect) and set it to Enable. If you don’t have XD option, search for NX or XN and enable it. Save the changes and restart your computer.
The “Windows 10 Automatic Repair couldn’t repair your PC” error is one of the harder errors to fix and it can make your computer almost unusable. Although this is a serious error, we hope you’ve managed to fix it by using one our solutions.
Tell us how your fix ended up below in our comments!

Nguồn: windowsreport.com